NEW ENGLAND

 steril-aire logo.gif (6561 bytes)
Home Page The Problem The Solution Steril-Aire For Commercial Buildings And Hospitals Steril-Aire For Schools And Classrooms Steril-Aire For Your Home What Others
Are Saying		 Inquiry Form Send Us
An E-Mail

Steril-Aire Makes A UVC Emitter
To Suit Nearly Every Need

Steril-Aire UVC Emitters offer these benefits:

  • 2.5 up to 7 times the output of conventional UVC products.

  • Effective control of organisms associated with poor IAQ including cold, flu, measles, and other viruses:   Legionella, TB, whopping cough and other bacteria; infection and allergy-causing mold and mold products.
  • No ozone, no gases or fumes, no secondary contamination - will not harm occupants, equipment or furnishings.
  • Lowest life-cycle cost and longest service life.
  • Patented, state-of-the-art, solid state electronic power supplies provide higher output, performance, reliability and efficiency.

DE Series UVC Emitters For Standard Installations

Steril-Aire DE Series UVC Emitters are the ideal choice for all medium to large systems.  They can be mounted and wired in parallel and/or end-to-end on duct walls or in rack arrays to satisfy most HVAC cavity configurations.  They can be installed anywhere in the system to prevent microbial growth and/or kill airborne microorganisms:  coils, drain pans, return and supply ducts, mixing plenums, exhaust systems, etc.  Two sizes (18" and 24" lengths) afford maximum versatility while providing the greatest amount of output in the smallest footprint. DE181.jpg (7742 bytes)

Model DE 181 VO &DE 241 VO

X-Mount™ UVC Emitters For
Limited Access Installations

External-mount (X-Mount) UVC Emitters are installed from the exterior and through the wall of HVAC equipment, making them ideal for germicidal sites that cannot be accessed internally.   Emitters are serviced from outside the unit.  Applications include fan coils, heat pumps, unit ventilators, packaged air handlers, terminal units and individual duct runs.  Three Emitter lengths (16", 20" and 24") provide the flexibility to achieve virtually any kill ratio in any HVAC cavity configuration. SE161.jpg (14112 bytes)

Model SE 161 VO, SE 201 VO &
SE 241 VO X-Mount Style

SteriLadder™ Series For All Custom Applications

The SteriLadder Series is the ultimate in high kill ratio germicidal irradiation.  Units can be fabricated in vertical sections of 18" or 24" center lines or any combination thereof to the desired height, and in widths of up to 10 feet depending on the application.  Emitters are serviced from within the air stream while the power supplies are external to the air stream.  They come pre-wired and fully assembled for easy field installation. Steriladder.jpg (9180 bytes)

SteriLadder Example - Configurations Vary

SteriLight™ Series For Light
Commercial Or Residential Systems

The SteriLight Series brings proven germicidal technology into residential and light commercial heating and air conditioning systems.  Installed from the exterior and at the downstream side of the cooling coil, they protect coils, drain pans and humidifiers from typical mold and bacterial growth while killing airborne microorganisms.  Two configurations (10" and 14" center lines) and two Emitter lengths (20" and 24") are offered to fit virtually any new or existing system. SAUVSR.jpg (18241 bytes)

Model RSE 202 HO & RSE 242
HO Sterilight™ Series

Take me to the top of this page.